Gibson SG Special Electric Guitar,Worn Brown Satin

Packing the same power and intensity as the SG Standard, but without all the trimmings, the Gibson's SG Special electric guitar retains the heart and soul of the SG--solid mahogany body and '50s rounded neck profile--while adding dot inlays, silk-screened logo, a pair of Gibson’s hot 490 humbuckers and a deluxe gig bag.

The Gibson SG Special in worn brown. Click here for a larger image.

Key Features

'50s Rounded Neck Profile

No guitar neck profiles are more distinguishable than the neck profiles employed on the Gibson models of today. The more traditional '50s neck profile on the SG Special is the thicker, rounder profile, emulating the neck shapes found on the iconic 1958 and 1959 Les Paul Standards. The neck is machined in Gibson's rough mill using wood shapers to make the initial cuts. But once the fingerboard gets glued on, the rest--including the final sanding--is done by hand. That means there are no two necks with the exact same dimensions. So while it still has the basic characteristics of its respective profile, each neck will be slightly different, with a distinct but traditional feel.

Click here for a larger image (black finish shown).

 

Click here for a larger image.

 

Gibson's 490 (R) Rhythm and (T) Treble Pickup

The mid to late 1960s saw the emergence of a very different type of music coming from the clubs of England. It was an interpretation of the blues that hadn't been heard before, and it was much harder, more rocking, and definitely louder than anything else before it. As such, this new genre's players were demanding more powerful amplifiers with increased volume outputs to satisfy their sonic explorations. This led to a call for a more versatile pickup that could split coils through a push/pull knob, and prevent microphonic feedback from occurring when the volumes were turned up to maximum levels.

Gibson answered this call with the introduction of the revolutionary 490T and 490R pickups ("T" for treble, and "R" for rhythm). The 490R is a humbucker with the tonal characteristics of an original PAF, with a slight increase in upper mid-range response. The 490T bridge pickup is calibrated to match the 490R, with pole pieces aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.

Solid Mahogany Body

Probably the most central of all the SG Special's features is its solid mahogany body--lightweight, strong, with a thick, warm tone. The mahogany goes through the same rigorous selection process as all of Gibson's woods, and is personally inspected and qualified by Gibson's team of skilled wood experts before it enters the Gibson factories.

Inside the Gibson factories, humidity is maintained at 45 percent, and the temperature at 70 degrees. This ensures all woods are dried to a level of "equilibrium," where the moisture content does not change during the manufacturing process. This guarantees tight-fitting joints and no expansion, in addition to reducing the weight. It also helps with improving the woods' machinability and finishing properties. Consistent moisture content means that a Gibson guitar will respond evenly to temperature and humidity changes long after it leaves the factory.

Dot Inlays

Over the years, the classic dot inlay has been one of the more traditional features of many Gibson models, including the SG. A figured, swirl acrylic gives these inlays that classic "pearl" look. They are inserted into the fingerboard using a process that eliminates gaps and doesn't require the use of fillers.

Nitrocellulose Finish

This guitar features a nitrocellulose finish--one of the most labor-intensive elements of the guitar-making process--which dries to a much thinner coat than a polyurethane finish, meaning there is less interference with the natural vibration of the instrument, allowing for a purer tone.

A nitro finish is also a softer finish, which makes it easily repairable. You can touch up a scratch or ding on a nitro finish, but you can't do the same on a poly finish. In addition, a nitro finish is very porous in nature, and actually gets thinner over time. It does not "seal" wood in an airtight shell--as a poly finish does--and allows the wood to breathe and age properly.

What's in the Box

Gibson SG Special electric guitar, Gibson Deluxe Gig Bag, and owner's manual.